100 kW SILENT GENERATOR SETS
- Power Ratings:100 kW 58KVA Standby / 58 kW 58KVA Prime
- Engine:John Deere 4045 TF158, water cooled, 1800 RPM
- EPA Compliant:Export / Non-Certified
- Alternator:CGT Stamford UCI 224, single bearing
- Controller:BC 7210 Auto Start (DSE 7210 based) with overspeed protection
- Condition:Brand New, 2 Years International Warranty
- Quality:Load bank tested and ISO 9001:2015 certified
OVERVIEW
The JJP-100GF is the first rating in the range where three-phase motor starting, not steady load, decides the size. A 100 kW genset on a 0.8 power factor gives 125 kVA prime and 138 kVA standby, which is enough to direct-on-line start a 30 kW motor or soft-start a 45 kW one. If your load list is mostly motors, send it to us before you fix the rating — the starting kVA, not the running kW, is what will fail.
POWER RATINGS
| Rating | kW | kVA (0.8 PF) | Duty |
|---|---|---|---|
| Standby (ESP) | 110 kW | 138 kVA | Loss of mains only, 200 h/yr |
| Prime (PRP) | 100 kW | 125 kVA | Unlimited hours, 10% overload 1 h in 12 |
All ratings at 0.8 power factor, 50 Hz or 60 Hz, 3-phase 4-wire. 60 Hz ratings are approximately 20 percent higher in kW for the same frame.
ENGINE OPTIONS ON THIS FRAME
| Brand | Engine model | Standby output | Cylinders | Displacement |
|---|---|---|---|---|
| Weichai | WP4.1D100E200 | 100 kW | 4-cyl | 4.1 L |
| SDEC | 4HTAA4.3-G34 | 100 kW | 4-cyl | 4.3 L |
| Yuchai | YC4D130-D21 | 100 kW | 4-cyl | 4.2 L |
| Perkins | 1104C-44TAG2 | 80 kW | 4-cyl | 4.4 L |
The engine is matched so that its standby output exceeds the alternator rating by 10–15 percent. We will quote any of the options above at the same alternator rating; the price difference between them is the engine cost, nothing else.
ALTERNATOR, CONTROL AND ENCLOSURE
Alternator: Faraday FD3A-4 / Stamford UCI274, brushless, single-bearing, Class H insulation, IP23, 2/3 pitch winding for low waveform distortion. Controller: Deep Sea DSE7320 MKII as standard, with DSE8610 for parallel operation. Enclosure: powder-coated steel canopy, 65–75 dB(A) at 7 m depending on grade, with lockable access doors on both sides, integral double-walled fuel tank and a residential-grade exhaust silencer inside the canopy.
DIMENSIONS AND FUEL CONSUMPTION
| Open skid (L x W x H) | 2300 x 1050 x 1450 mm |
| Open skid weight | 1100 kg |
| Silent canopy (approx.) | add 300 mm to each dimension, add 180–250 kg |
| Fuel consumption | ≤ 200 g/kWh at full load |
WHAT THIS RATING SUITS
Factory with motor loads; commercial tower essential services; hospital wing; medium cold store; water treatment plant; construction site with tower crane.
BUYING THIS RATING FROM THE FACTORY
Jinjia Power is a diesel generator supplier and genset manufacturer in Dongguan, China. This 100 kW genset is assembled and load-bank tested at 100 percent rated output in our own works before it ships, and it carries a 2-year international warranty. Send the standby kVA you need, the voltage and frequency (50 or 60 Hz) and the destination port, and you get a firm quote inside one working day — engine model, alternator frame, controller, canopy grade and CIF price on one sheet.
Because we assemble in-house rather than resell, a non-standard rating, a dual-frequency output, a super-silent canopy or a containerised package is a build option, not a special order. Ask us for the price of this rating against the next one up before you decide — the step from 100 kW to the next frame is usually smaller than buyers expect.