
Status: IN STOCK, Same day shipping Worldwide available | Brand New, Certified Factory Original
Volume, OEM and project pricing available on request.
| Catalog Number | 3AUSB30250FG0M |
| Series | ASCO Series 300SE |
| Product Type | Service Entrance Automatic Transfer Switch (ATS) |
| Ampere Rating | 250 A |
| Number of Poles | 3 Poles |
| Voltage Rating | 240V |
| Neutral Configuration | Switched Neutral |
| Frequency | 50 / 60 Hz |
| Enclosure | NEMA 3R (Outdoor Rain-tight) |
| Transition Type | Open Transition |
| Controller | Group G |
| Certification | UL 1008 Listed |
| Applicable Standard | NEC / NFPA 70 Articles 700, 701 and 702 |
| Generator Compatibility | Two-wire automatic-start generators |
| Load Disconnect Contact | 5 A resistive at 30 VDC max / 100 mA at 5 VDC min |
| Communication (opt. 11BE) | RS-485, 9,600β11,5200 bps, address 1β247 |
| Manufacturer | ASCO Power Technologies (Schneider Electric) |
| Availability | IN STOCK β same-day shipping, worldwide |
| Condition | Brand New, Certified Factory Original |
| Warranty | 1 Year |
Jinjia Power Equipment Co., Ltd | Address: No.737, Guanzhang Road, Liaobu Town, Dongguan, China
Phone: 86-13553838770 | 86-0769-89610677 | info@jinjiadongli.com
Jinjia Power, Quality Assured
The 3AUSB30250FG0M is rated 250 A at 240V, 3-pole. It is a Service Entrance Automatic Transfer Switch (ATS) built on ASCO Series 300SE.
3AUSB30250FG0M is a Service Entrance Automatic Transfer Switch (ATS) in the ASCO Series 300SE family with Open Transition.
The 3AUSB30250FG0M is specified for Two-wire automatic-start generators. Match the switch ampere rating to the generator output current and confirm the voltage and pole configuration before ordering.
The 3AUSB30250FG0M uses Group G. The controller supervises the normal and emergency sources and drives the transfer sequence.
The 3AUSB30250FG0M is supplied in NEMA 3R (Outdoor Rain-tight). Confirm the enclosure rating against your installation environment, indoor or outdoor, before ordering.
The 3AUSB30250FG0M is supplied with Switched Neutral. This matters on systems with ground fault protection, where a switched neutral is normally required.
Yes. The 3AUSB30250FG0M provides 5 A resistive at 30 VDC max / 100 mA at 5 VDC min, which can be used for signalling or to interlock downstream equipment.
The 3AUSB30250FG0M offers RS-485, 9,600β11,5200 bps, address 1β247. This allows transfer status and source availability to be reported to a building management or monitoring system.
3AUSB30250FG0M is certified to UL 1008 Listed. It is designed and tested to NEC / NFPA 70 Articles 700, 701 and 702. Request the current certificate for your project file before submission.
The 3AUSB30250FG0M is a 3-pole device. Pole count must match your distribution: single phase two wire, three phase three wire, or three phase four wire with neutral.
The 3AUSB30250FG0M is rated for 50 / 60 Hz. Confirm the generator and the utility supply are on the same frequency before installation.
3AUSB30250FG0M is manufactured by ASCO Power Technologies (Schneider Electric). Current availability: IN STOCK β same-day shipping, worldwide. Condition: Brand New, Certified Factory Original. Warranty: 1 Year.