
Status: In Stock | Brand New, 1 Year Warranty
Volume, OEM and project pricing available on request.
| SKU | GPR-P500-60T4F |
| Availability | In Stock |
| Condition | Brand New, 1 Year / 2000 Hours Prime Service Duty |
| EPA Compliance | EPA / CARB Tier 4 Final |
| Standby Power (ESP) | 500 kW / 625 kVA |
| Prime Power (PRP) | 450 kW / 563 kVA |
| Rated Current | 752 A Standby / 677 A Prime @ 480/277 V | 1735 A / 1561 A @ 208/120 V |
| Voltage / Phase | 480/277 V, 208/120 V (3 Phase) | 240/120 V (1 Phase 270 kW) — 60 Hz, 0.8 PF |
| Engine Make | Perkins (UK) |
| Engine Model | Perkins 2806F-E18TAG3, 6-Cylinder In-Line, 18.1 L, Bore × Stroke 145 × 183 mm, Compression Ratio 16.0:1, Turbocharged & Air-to-Air Aftercooled, 1800 RPM, 555 kW (744 HP), Electronic Governor |
| Emissions Aftertreatment | DOC + SCR, EPA / CARB Tier 4 Final |
| Alternator | Leroy Somer TAL-47-D, 4-Pole, 3 Phase, 0.8 PF, AREP Auxiliary Winding Excitation, 250% / 5 s Short-Circuit Capability, Class H / H, Direct Single-Bearing Coupling |
| Voltage Regulator | Deep Sea DSEA109 Digital AVR, ±1.0% Voltage Regulation |
| Controller | Deep Sea Electronics DSE7310, UL Listed |
| Circuit Breaker | ABB T-Max Range, 3-Pole, Set Mounted, Maximum Output Rated |
| Fuel Tank | 600 Gal (2,271 L), 2-Wall NON-UL, 110% Containment |
| Fuel Consumption | 126.7 L/hr (33.5 Gal/hr) @ 100% Prime Load | 106.7 L/hr (28.2 Gal/hr) @ 75% Prime Load |
| Runtime Autonomy | 18 Hours @ 100% Load | 21 Hours @ 75% Load |
| DEF Tank | 24.7 Gal (93 L) Integral, 37 Hours @ 75% Load; DEF Consumption 2.5 L/hr (0.66 Gal/hr) |
| Overall Dimensions | 5,842 × 2,134 × 2,272 mm (L × W × H, Standard Silent Enclosure) |
| Dry Weight | Approx. 8,000 kg (17,640 lb) — exact weight per configuration |
| Sound Level | Meets & Exceeds North America Level 2 / EU 2000/14/EC; Approx. 77 dB(A) @ 7 m |
| Trailer | D.O.T. Compliant, 24,000 lbs GVWR, 3-Axle with Electric Brakes, 6× Bias 6-Ply Load Range C Tires, Pintle Ring Hitch, 10K Top Wind Tongue Jack, 2× 10K Side Wind Rear Jacks, 1/4" × 30" Safety Chains |
| Enclosure | AL5052 12 GA Marine-Grade Aluminium, IP56, RAL9003 White Polyester Powder Coat, Level-2 Discharge Plenum, XXL Beam-Less Dual-Side Access |
| Power Distribution | 2× 20 A Duplex Outlets, 3× 50 A 125/250 V Twist Locks, 25× 400 A E1016 Female Camlocks, 5× 350 kcmil–6 AWG Mechanical Lugs |
| Protection | ANSI 27/59, ANSI 32, ANSI 50, ANSI 81, ANSI 87G Ground Fault, Over/Under Speed, High Coolant Temp, Low Oil Pressure, Low Coolant Level, Fuel Leak, Breaker Safety Switch, Voltage Selector Interlock |
| Load Acceptance | ISO 8528-5 Class G3 (with electronic governor and digital AVR) |
Jinjia Power Equipment Co., Ltd | Address: No.737, Guanzhang Road, Liaobu Town, Dongguan, China
Phone: 86-13553838770 | 86-0769-89610677 | info@jinjiadongli.com
Jinjia Power, Quality Assured
The 500 KW EPA Tier 4 Generator delivers 500 kW / 625 kVA standby, and 450 kW / 563 kVA prime per ISO 8528 duty definitions. Standby rating applies to emergency use under varying load; prime rating applies to continuous operation under a steady load.
The 500 KW EPA Tier 4 Generator is configured for 480/277 V, 208/120 V (3 Phase) | 240/120 V (1 Phase 270 kW) — 60 Hz, 0.8 PF. Confirm the required voltage and phase before ordering, since the reconnectable alternator is set at the factory.
The 500 KW EPA Tier 4 Generator is powered by Perkins (UK), model Perkins 2806F-E18TAG3, 6-Cylinder In-Line, 18.1 L, Bore × Stroke 145 × 183 mm, Compression Ratio 16.0:1, Turbocharged & Air-to-Air Aftercooled, 1800 RPM, 555 kW (744 HP), Electronic Governor.
The 500 KW EPA Tier 4 Generator uses Leroy Somer TAL-47-D, 4-Pole, 3 Phase, 0.8 PF, AREP Auxiliary Winding Excitation, 250% / 5 s Short-Circuit Capability, Class H / H, Direct Single-Bearing Coupling. The alternator is matched to the engine output with margin for transient loads.
Voltage on the 500 KW EPA Tier 4 Generator is held by Deep Sea DSEA109 Digital AVR, ±1.0% Voltage Regulation, which keeps output steady as load steps on and off.
The 500 KW EPA Tier 4 Generator is controlled by Deep Sea Electronics DSE7310, UL Listed. The controller handles start, stop, protection shutdowns and mains failure changeover when an ATS is fitted.
The 500 KW EPA Tier 4 Generator is fitted with ABB T-Max Range, 3-Pole, Set Mounted, Maximum Output Rated. Breaker rating is matched to the set output so the generator is protected against overload and short circuit.
The 500 KW EPA Tier 4 Generator has 600 Gal (2,271 L), 2-Wall NON-UL, 110% Containment. Confirm the base tank meets your local containment rules before siting the set.
Fuel consumption on the 500 KW EPA Tier 4 Generator is 126.7 L/hr (33.5 Gal/hr) @ 100% Prime Load | 106.7 L/hr (28.2 Gal/hr) @ 75% Prime Load. Consumption rises with load, so size the tank against your expected duty cycle rather than the headline figure.
The 500 KW EPA Tier 4 Generator runs for 18 Hours @ 100% Load | 21 Hours @ 75% Load. For longer outages, plan a bulk fuel supply or a refuelling schedule alongside the set.
Dimensions: 5,842 × 2,134 × 2,272 mm (L × W × H, Standard Silent Enclosure). Dry weight: Approx. 8,000 kg (17,640 lb) — exact weight per configuration. Check access routes, crane capacity and floor loading before delivery.
Sound level on the 500 KW EPA Tier 4 Generator is Meets & Exceeds North America Level 2 / EU 2000/14/EC; Approx. 77 dB(A) @ 7 m. Site the set away from noise-sensitive boundaries and check local limits before installation.
The 500 KW EPA Tier 4 Generator can be supplied trailer mounted: D.O.T. Compliant, 24,000 lbs GVWR, 3-Axle with Electric Brakes, 6× Bias 6-Ply Load Range C Tires, Pintle Ring Hitch, 10K Top Wind Tongue Jack, 2× 10K Side Wind Rear Jacks, 1/4" × 30" Safety Chains. Trailer configuration is normally chosen for rental fleets and site work where the set moves between locations.
Emission compliance: EPA / CARB Tier 4 Final.
The 500 KW EPA Tier 4 Generator is currently In Stock. Condition: Brand New, 1 Year / 2000 Hours Prime Service Duty. Request the current datasheet and test report with your quotation.
The 500 KW EPA Tier 4 Generator suits standby duty for commercial buildings, industrial plant, telecom sites and rental fleets where a compact, trailer-mountable set is required. Load type and starting current determine the final rating choice.